​ND-150 Screw Winch Hoister

Short Description:

Lg-3300 φ159 tube spiral stranded feeder is an efficient lifting and feeding equipment, this machine is groove tube spiral forced high speed rotation feeding mode, spiral blade rotates in the groove barrel through the shaft, the blade will rotate the material, to achieve the material from bottom to top lifting.


Product Detail

Product Tags

Ⅰ、Equipment introduction

Lg-3300 φ159 tube spiral stranded feeder is an efficient lifting and feeding equipment, this machine is groove tube spiral forced high speed rotation feeding mode, spiral blade rotates in the groove barrel through the shaft, the blade will rotate the material, to achieve the material from bottom to top lifting.

This machine is widely used for mixing various elements in vegetable processing, seasoning, food, chemical industry, medicine, salt, feed and other industries. It has the characteristics of fast feeding speed, high efficiency, variety of feeding, short discharging time and less residue. Suitable for dishes, thick, paste, powder, etc.

Lg-3300-main2

Ⅱ、Main parameters of equipment

project unit parameter note
Trough the specification mm φ159,L=3300
power Kw 2.2
voltage V Three-phase 240V(220-480/ custom)
frequency Hz 50
Promote efficiency % 99-100
capacity Kg/h 1500-6000
Effective volume of tank bucket m3 0.062
Inlet height mm 550
Inlet dimension mm 400×400
Outlet height mm 580
Discharge port size mm φ114
 dimensions mm 2740×930×2875
 weight Kg 320

(Equipment assembly outline drawing)

image007

Ⅲ、Equipment installation

1. The machine must be placed on a solid dry, ventilated level ground, and the ground must be calibrated with a level instrument to ensure that the machine works smoothly and reliably.
2. The voltage used by the machine is three-phase 240V, and the power supply voltage is determined to be consistent with the voltage used by the machine; Power switch should be installed outside the body before entering the line.
3. The grounding wire is reliably grounded, and the power line is fastened and sealed with the inlet and outlet parts of the machine to avoid water leakage and electricity leakage.
4. There should be no impact vibration or abnormal sound when the machine is running empty. Otherwise, the machine will be stopped for inspection.

Ⅳ、Steps of operation

1. The operator should be familiar with the performance of the whole equipment and understand the function and operation method of each component of the unit.
2. before starting the machine, we must carefully check the connection parts of mechanical and electrical equipment, bolts and other should not be loose, whether there is a stuck phenomenon, do not fall into foreign bodies, all normal before starting.
3. When the machine is running, open the reverse switch to confirm whether the direction of rotation is correct. After opening, you can test with a small amount of materials to see if the purpose of feeding is achieved. Ensure that the equipment is normal before feeding, feeding must be uniform, do not suddenly pour a large number of material.

Ⅴ、Note

1. according to the different types of materials, should be added at a uniform speed, the material should not be mixed with sundry hard objects, wire, otherwise affect the life of the machine.
2. Before the production starts, no-load operation test should be carried out to check whether the stirring shaft is running correctly and making no noise, and check whether all transmission parts are normal.
3. do not place any irrelevant items on the machine, so as not to start the accident.
4. Once abnormal phenomenon is found during operation, the power supply should be cut off immediately (emergency stop button) and stop for inspection.

Ⅵ、Maintenance and maintenance

1. before starting the reducer must add an appropriate amount of 45 mechanical oil.
2. Every 200-300 hours of work, lubricating oil should be added to the rolling bearing once, and it should be cleaned once a year.
3. every 3-6 months to check the motor bearing oil replacement once.

VII、Production line configuration

In addition to being used alone, the tube spiral stranding feeder is configured in automatic production line, which is commonly used in the production line of dehydrated vegetables. The first procedure is the cutting and blanching of materials, and the last procedure is the automatic drying of materials. This process can be used as stirring glucose feeding; Or after mixing the material delivery.

image009

  • Previous:
  • Next:

  • Related Products