Factory Promotional Food Dehydrator Perth - Stem and Leaf Winnowing Machine – Ligong
Factory Promotional Food Dehydrator Perth - Stem and Leaf Winnowing Machine – Ligong Detail:
I. Functions
Stem and leaf winnowing machine is suitable for dehydrated vegetables, tea leaves, dry food foreign body removal, using specific gravity selection, quantitative supply, wind regulation and other means. It can remove the heavy foreign body in the finished product, such as: stone, sand, metal; Light foreign body, such as: paper, hair, sawdust, plastic, silk cotton.
Ⅱ. The Principle of Stem and Leaf Winnowing Machine
Ⅲ. Technical Parameters
(1) Fan: GB 4-72 no. 6 centrifugal fan motor Y112M-4 B35 4KW
(2) Flow: 14500M3/h full pressure 723P
(3) Output: 1000-5000kg /h
(4) Weight: 800Kg
(5) Height of inlet from ground: 760mm ; Feed inlet width :530mm
(6) Heavy material outlet height from the ground :530mm ; Outlet size 600×150mm
(7) Light material outlet height from the ground: 1020mm ; Outlet dimensions 250 x 250mm
(8) Overall size: 5300×1700×3150mm
Ⅳ. Operation Steps
(1). Turn on the power switch of fan 1 and adjust the frequency conversion to the set parameters: green onion frequency conversion to 10±2Hz, Cabbage to 20±3Hz, carrot to 25±3Hz.
(2). Turn on the power switch of fan 2 and adjust the frequency conversion to the set parameters: green onion frequency conversion to 25±2Hz, Cabbage to 40±8Hz, carrot to 35±2Hz.
(3). Turn on the power switch and fan bracket power supply.
(4). Turn on the vibration power switch.
(5). After the work, cut off the power switch of each part of the air separator from back to front in reverse order.
Ⅴ. Notes
(1). When the machine is in operation, pay attention to whether the machine selection effect is normal. If there is any abnormality, make relevant adjustment in time.
(2). The size of vibration and material forward speed adjustment: according to the variety of materials, the hand wheel at the bottom of the end face, adjust the motor tensioning pulley, with the material slightly turn forward is better.
(3). If the temperature is high and the humidity is high, it is not suitable to start the machine.
This series of products are guaranteed for one year, lifelong maintenance service.
Product detail pictures:
Related Product Guide:
We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for Factory Promotional Food Dehydrator Perth - Stem and Leaf Winnowing Machine – Ligong, The product will supply to all over the world, such as: Uruguay, Rio de Janeiro, Cannes, We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Honorio from Zurich - 2018.06.09 12:42
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Janice from Florida - 2018.04.25 16:46