Manufactur standard Dehydrator Tray - Magnetic vibration screening – Ligong

Product Introduction

Technical Parameters

Precautions for Use

Ⅲ、The installation

1. The centrifuge should be fixed on the overall concrete foundation, and can be poured according to the foundation size drawing (see the right picture and the table below);
2. Foundation should be embedded anchor bolts, foundation shape should be greater than the triangle chassis size of 100 mm, after the concrete dry, can be lifted into place, and horizontal correction;
3. The electric motor should be installed by electrician according to the electrical schematic diagram, and at the same time do a good job of waterproof and wet protection, explosion-proof motor should be equipped, the user should put forward the selection notice.

Ⅳ、Maintenance and maintenance

1. The centrifuge must be operated by a special person, do not increase the loading limit at will, pay attention to check whether the rotation direction is consistent with the operation;
2. It is not allowed to increase the speed of the centrifuge at will. After 6 months of use, it is necessary to carry out a comprehensive inspection, clean the drum parts and bearings, and add lubricating oil;
3. Regularly check whether the solid parts of the centrifuge are loose;
4. In 6 months (since the date of purchase) product quality implementation of three guarantees, such as improper operation caused or caused damage to the machine by the user’s own responsibility.